Authorized dealer · Car Audio Bargain

4,500W+ Monoblock Amplifiers

Competition walls, SPL builds and extreme daily systems need amplifiers that can deliver thousands of watts into low-impedance subwoofer loads. This 4,500W+ collection includes Crossfire BMF 8k, BMF 12K, BMF-15k and XT-6K amps, Sundown Audio SALT-6, SALT-8, SALT-12, SIA-5000D, SIA-8000D and TEAM-10K models, and the Audio Apex CAB-45v2.

  • 10 products
  • Audio Apex · Crossfire Car Audio · Sundown Audio
  • Free shipping over $250
Back to Amplifiers

10 products

Electrical Planning for 4,500W and Up

At this level the amp is only as strong as the power behind it. Builds commonly run one or more high-output alternators, a bank of AGM or lithium batteries, and multiple runs of heavy power and ground wire to keep voltage up under load. SuperBank ultra capacitors can help steady voltage during short, hard bass hits. Measure voltage at the amp terminals while playing, because voltage lost in the wiring is output you never hear.

Choosing a High-Power Mono Amp

Plan the final impedance first

Competition amps are often designed around very low loads, but each model has its own minimum. Decide how many subs you will run and how the coils will be wired, then choose an amp whose chart covers that exact load. Running below the rated minimum invites protection shutdowns or failure.

Cooling and mounting

Thousands of watts means a lot of heat. Mount the amp solidly with clear airflow across the heatsink, and plan for fans or a vented rack if the system will see long demos or burps.

Tuning safely

Use an oscilloscope or clamp meter with test tones to set gain, set the subsonic filter for your box tuning, and build up power gradually while watching voltage and temperature.

Series in this range

  • Crossfire Car Audio: the XT-6K rated at 6,000 watts RMS, the BMF 8k at 8,000 watts RMS, the BMF 12K at 12,000 watts RMS, and the BMF-15k.
  • Sundown Audio: SALT-6, SALT-8 and SALT-12 competition amps, the SIA-5000D and SIA-8000D, and the TEAM-10K.
  • Audio Apex: the CAB-45v2, rated at 4,500 watts RMS.

Related Power Bands

For loud systems that do not need competition power, compare the 3,500W to 4,400W monoblock amplifiers or every monoblock amp. The rest of the lineup is in amplifiers. A 4,500W+ amp rewards careful planning with output that only a serious build can use.