4 x Sundown Ev4 10" D2 Subwoofers & 1 CAB-22 Amplifier
Sale

4 x Sundown Ev4 10" D2 Subwoofers & 1 CAB-22 Amplifier

Car Audio Bargain (CAB)
$1,039.99 $869.99
$1,167.99
(You save $298.00 )
(No reviews yet)
Weight:
100.00 LBS
Current Stock:
Adding to cart… The item has been added
Description

This Package Contains 4 Sundown Ev4 10" D2 Subwoofers & a CAB-22 Amplifier

 

Audio Apex CAB-22 Amplifier

CAB-22 Amplifier 

The CAB-22 amplifier is one of the BEST bang for the buck in car audio right now. The CAB-22 is a half bridge designed monoblock class D amplifier is strappable and capable of making 2200 watts RMS @1 ohm. The CAB-22 also comes with a bass knob which features a clip light.

Be sure to check out the video below, in the amp test done by Sundown Audio Unofficial. The CAB-22 put out over 2300 watts RMS at 1 ohm on the amp dyno. T (4400w at 1 ch at 2 ohms for two strapped)

Operational Voltage: 9.0v -16.0v

Power: 2200w RMS @ 1 ohm at 14.4v

Power: 1500w RMS @ 2 ohm at 14.4v

Power: 900w RMS @ 4 ohm at 14.4v

Frequency Response: 17Hz-180Hz (-3dB)

Signal Noise Ratio: 90dB

Input Sensitivity: 20,000 Ohms

Input Sensitivity: 100MV-6V

T.H.D. : <0.05%

Bass Frequency: 30Hz-80Hz

Low Pass Frequency: 40Hz-80Hz

Subsonic: OFF-50Hz

Bass Boost: 0-12dB

 

 

The third version of our acclaimed E series is all new for 2016. Since we introduced the first E series in 2012 we have sought to push the limits of entry-level woofers forward. Typical entry level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance – all of these bars have been raised once again for our third generation E series.

A double stacked magnet structure and an extremely long voice coil allow us to achieve a class-leading linear x-max of 14mm one-way in addition to high mechanical clearances (over 2” peak-to-peak before physical coil bottom). The E v.3 series has been upgraded to a full 2.5” diameter coil compared to the 2” coil of previous generations. The tinsel leads have been upgraded to a new “Mini-XL” lead containing 63-strands of conductor (a full XL is 84-strands and previous leads contained 42-strands) to help prevent potential failure due to amplifier clipping. The spider itself is a high-strength poly-cotton blend designed to handle the full capacity of the motor. To provide an additional level of ruggedness the spider is bolted down and glued to the frame.

The new stamped steel frame is also significantly stronger than previous generation E series woofers & features an enhanced “Sundown style” high pressure vented spider landing. Working in conjunction with a motor ventilation system based on our SA series & the new, larger voice coil the third generation E series possesses thermal capacity unheard of in this class of subwoofer.

Bottom-line; if you are looking for a great subwoofer option and do not want to break the bank the Sundown E-Series woofers are for you & these are the best E series made to date. They are ideal for anyone from beginners to seasoned professionals seeking industry leading performance at a value price point.

Features & Technology:
Xmax = 14mm one-way by 70% BL
RMS Power = 500-watts
Vented magnetic gap
Vented pole piece with optimized geometry
Black Aluminum 2.5” voice coil former for superior heat dissipation
High Temperature 4-Layer copper voice coil wire
Spring Loaded Terminals
Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
High strength stamped steel frame
Optimized for small, sealed & ported enclosures

T/S SPECS Ev4 10″ D2 Ev4 10″ D4
RE (Ohms) 4.0 6.1
FS (Hz) 32.2 33.5
VAS (L) 19.4 18.8
Qes 0.38 0.43
Qms 4.76 4.39
Qts 0.35 0.39
Le (mH) 2.55 3.59
BL (NA) 20.2 23.5
Mms (Grams) 192.0 183.7
Cms (uM/N) 0.13 0.12
Sens (dB @ 1w/1m) 84.2 84.0
ENCLOSURE SPECIFICATIONS
Sealed Enclosure 0.5 cu ft
Ported Enclosure 1.0 cu ft
Recommended Tuning 32Hz
Recommended Port Area 16 sq in
Displacement 0.11 cu ft
Depth 5.625″
Outside Diameter 10″
Cut-Out 8.875″
Warranty
our CAB-22 has 2 different warranty options available. To keep the price as low as possible, the base amplifier carries a 90 warranty against manufacturers defects only. This warranty does not cover damage done to amplifiers from miswiring, blown speakers, low voltage, and other user errors that cause burned transistors. The premiere warranty tier covers practically all forms of damage done to the amplifier for 2 years. This premium warranty also has a graduated deductible associated with user error failures to avoid intentional misuse of the policy. In the first 12 months, the first use has a 0.00 deductible, the second use has a 50.00 deductible, the third use will have a 100.00 deductible. the 4th and all subsequent uses will have a 150.00 deductible. If the first use is in the second year, the deductibles start at 50.00 instead of 0.00. This warranty is non transferable, and is only valid for the original purchaser.